|
|
|||||||
| Golf Carts and Parts *No Commercial Ads |
  |
|
|
Thread Tools | Display Modes |
06-06-2024, 10:22 AM
|
#1 |
|
Gone Wild
 Join Date: Jan 2015
Location: Southern IL
Posts: 499
|
Programming Cable for Denago/FJ Controller
I need to connect to a Denago with a FJ controller. I have the USB Serial adapters, and have made other cables in the past for various cart models, so I am familiar with the process. I also have the correct connector in my stash.
I was just wondering if someone would share the pinout and setup if they have already connected to a Denago, or an equivalent system, to save me some time figuring it out. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-06-2024, 10:27 AM
|
#2 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,645
|
Re: Programming Cable for Denago/FJ Controller
If it has the Curtis controller does it have the big 4 pin AT04 plug?
Like this? https://www.buggiesgonewild.com/show...=189762&page=5 |
|
|
|
06-06-2024, 10:53 AM
|
#3 |
|
Gone Wild
Join Date: Jan 2015
Location: Southern IL
Posts: 499
|
Re: Programming Cable for Denago/FJ Controller
I don't have the cart in yet, but I believe it is going to look like this...
|
|
|
|
|
06-06-2024, 11:16 AM
|
#4 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,645
|
Re: Programming Cable for Denago/FJ Controller
Well I am no good for you here..
|
|
|
|
|
06-23-2024, 06:23 PM
|
#5 |
|
Not Yet Wild
Join Date: Jun 2024
Posts: 1
|
Re: Programming Cable for Denago/FJ Controller
I am following this thread,
I too am looking for the software and cable to adjust settings myself, I have the Nomad XL |
|
|
|
|
07-04-2024, 02:26 PM
|
#6 |
|
Not Yet Wild
Join Date: Jul 2024
Posts: 1
|
Re: Programming Cable for Denago/FJ Controller
Following for above reasons...hope to see some solutions soon. Please post up if you find any!
|
|
|
|
|
07-09-2024, 12:43 PM
|
#7 | |
|
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,524
|
Re: Programming Cable for Denago/FJ Controller
Quote:
|
|
|
|
|
|
09-05-2024, 12:16 PM
|
#8 |
|
Not Yet Wild
Join Date: Sep 2024
Location: Atlanta
Posts: 1
|
Re: Programming Cable for Denago/FJ Controller
The new Denago Rover XL has a 400w controller. Same programming software (the EV A software)?
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Denago carts | Other Lithium | |||
| Charger, Controller and Controller Programming Cable | Icon | |||
| Icon, Epic controller/charger remote programming/ cable rental | Icon | |||
| Curtis Controller (Club Car, E-Z-Go, Etc.) Programming Cable (1309USB) | Golf Carts and Parts | |||
Linear Mode
