![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: May 2024
Posts: 6
|
![]() I have a 2001 EZGO Model #M301 and 48v. When the key is in the off position, the selector is in F, and press the pedal, the cart goes forward. Same in R position it goes backwards. In N position and perdal press cart does not move. Turn the key on, and the battery meter lights up, and turn the key to third position lights come on. I checked the keyswitch and it is closed between poles when tested in off position. I replaced the solenoid and still have the same issue. What else can it be and how to check it.
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() Join Date: Sep 2022
Location: Minnesota
Posts: 1,839
|
![]() Sounds like your key switch has failed. To make sure that is the case I would check it with all wires off the switch to be certain.
|
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
Join Date: May 2024
Posts: 6
|
![]() The key switch is okay. If i have key switch off then I turn the tow/kill switch on and off then the cart will not go we key switch in off position. As soon as I turn key on the cart will go. Turn key switch back off cart will still go when pedal pressed. I am not sure what the issue is.
|
![]() |
![]() |
![]() |
#4 |
Born to be Wild
![]() Join Date: Feb 2019
Location: Palm Harbor Florida
Posts: 3,964
|
![]() I would get a wiring schematic and start tracing every wire and verifying proper location.
|
![]() |
![]() |
![]() |
#5 |
Gone Wild
![]() ![]() Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,571
|
![]() If it is a 2001 with a run/tow switch and 48v it is definitely not stock. What controller is in it?
|
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
Join Date: May 2024
Posts: 6
|
![]() The controller is a 51-FX503G026. To also add what I just did today. If key is in on position and I am going forward by pressing pedal. I can switch key to off position and motor disengages. I take foot off pedal and come to complete stop, then press pedal again motor engages and goes forward.
|
![]() |
![]() |
![]() |
#7 |
Gone Wild
![]() Join Date: Sep 2018
Location: Md.
Posts: 1,169
|
![]() Did you check key-switch for correct wireing? Correct wires on correct terminals on switch?
😊 |
![]() |
![]() |
![]() |
#8 |
Not Yet Wild
Join Date: May 2024
Posts: 6
|
![]() Yes I have checked the wires on the key switch. Can I test by removing all wire from key switch?
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Ez-go TXT clicks when pedal is pressed but will not go forward or back? | Electric EZGO | |||
2001 Ezgo txt reverse buzzer in forward position | Electric EZGO | |||
Cart stops getting power if pedal goes more than half pressed | Electric golf carts | |||
Cart stops when gas pedal is pressed all the way | Electric Club Car | |||
Cart Clicks Rapidly When Pedal Pressed | Columbia ParCar |