WTB Ball Joint SPACERS ?

[Billfo]

I am looking for two new/better spacers to replace the two flimsey c-channel spacers that came with the cheap lift kit. Right side shown in the photo below.

Thanks for looking... Bill

[rabbitreborn]

Jakes is a site sponsor, maybe contact them and see if there adapters can be purchased seperately?

http://www.jakesliftkits.com/liftkit...20EZ5%201202WH

[essness]

Originally Posted by rabbitreborn

Jakes is a site sponsor, maybe contact them and see if there adapters can be purchased seperately?

http://www.jakesliftkits.com/liftkit...20EZ5%201202WH

Jakes has these, far better than what you show in the pic

We have welded a piece of 1/8th inch on the back of what is shown in the pic and that helped tremendously. It makes it a little more difficult if you need to remove it, and causes it to collect more crap.......it's a flawed design an I would just talk to Jakes and get the right part. They call them "tie rod extenders".

good luck

[Billfo]

That part you show looks like a much sturdier option. I will check his place out for "tie rod extenders".
Thanks.

Originally Posted by essness

Jakes has these, far better than what you show in the pic

We have welded a piece of 1/8th inch on the back of what is shown in the pic and that helped tremendously. It makes it a little more difficult if you need to remove it, and causes it to collect more crap.......it's a flawed design an I would just talk to Jakes and get the right part. They call them "tie rod extenders".

good luck

[Billfo]

I emailed Glen at Jakes Carts. Thanks.

Originally Posted by rabbitreborn

Jakes is a site sponsor, maybe contact them and see if there adapters can be purchased seperately?

http://www.jakesliftkits.com/liftkit...20EZ5%201202WH