|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-26-2021, 09:35 PM | #1 |
Not Yet Wild
Join Date: Dec 2019
Posts: 37
|
Secondary clutch not going in properly
Yamaha G2 , got new primary clutch and secondary clutch, secondary is a heavy spring (red) . Both worked great after install, ran for 4 to 5 weeks, now secondary clutch doesen"t open up all the way, its not clocked at the right position. ( not riding on the plastic dogs). What Have I done wrong ? anyone ?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2021, 05:56 AM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: Secondary clutch not going in properly
Is this a Yamaha clutch or aftermarket? Often times the aftermarket parts aren't made with high quality aluminum and are prone to breakage. Also not a fan of the the big red springs, they can also cause damage. When you installed the clutch did you remove the clip on the input shaft and use a spacer?
|
07-27-2021, 03:38 PM | #3 |
Not Yet Wild
Join Date: Dec 2019
Posts: 37
|
Re: Secondary clutch not going in properly
After market clutch, and yes i did use the spacer.
|
07-28-2021, 08:51 AM | #4 |
Getting Wild
Join Date: May 2021
Location: Minnesota
Posts: 125
|
Re: Secondary clutch not going in properly
Run from that heavy red spring! Remove it and put in the old one. You will be much happier. I had my clutch on and of about 5 times dealing with the red spring. You can still order some black thinner springs from Ebay or other places. Much better in my opinion.
|
07-29-2021, 04:25 PM | #5 |
Not Yet Wild
Join Date: Dec 2019
Posts: 37
|
Re: Secondary clutch not going in properly
do I need to replace the whole clutch? this one dosent have the hole to insert the black spring. Also the clutch worked great for a 3week period, but we put a lift kit on and then a couple days later is when we noticed the clutch not riding against the plastic wear guards. motor sounds like its running in a low gear.
|
07-30-2021, 09:29 AM | #6 | |
Getting Wild
Join Date: May 2021
Location: Minnesota
Posts: 125
|
Re: Secondary clutch not going in properly
Quote:
|
|
07-30-2021, 09:11 PM | #7 |
Not Yet Wild
Join Date: Dec 2019
Posts: 37
|
Re: Secondary clutch not going in properly
Thanks for the info. Ill try a different spring
|
07-31-2021, 02:55 PM | #8 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: Secondary clutch not going in properly
Call Plowmans Carts in site sponsors page
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G16-Clutch and Secondary Clutch setups | Gas Yamaha | |||
G8 secondary clutch | Gas Yamaha | |||
Need primary clutch to secondary clutch distance on a G9 | Gas Yamaha | |||
secondary clutch | Gas Yamaha | |||
g1 secondary clutch | Gas Yamaha |