|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-23-2021, 01:34 PM | #1 |
Not Yet Wild
Join Date: Jun 2021
Location: Rockwall, TX
Posts: 11
|
New controller installed, Solenoid not clicking
My Curtis 1268 controller went bad and replaced today with new one. After installing the Solenoid wont click in F or R... getting 1,2 code on 1268-5418 controller. Before changing i could go Fwd but not rev. Rev buzzer now comes on and it didnt before. Changed the TP in floor no dice.
any thoughts? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-23-2021, 02:32 PM | #2 |
Not Yet Wild
Join Date: Jun 2021
Location: Rockwall, TX
Posts: 11
|
Re: New controller installed, Solenoid not clicking
tested the solenoid and it works so i know its not that.
have continuity and power everywhere i should as well. |
06-24-2021, 05:27 AM | #3 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 2,000
|
Re: New controller installed, Solenoid not clicking
Fault code 1,2 on Curtis 1268 points to the throttle. When no clicks from solenoid, i'd check the micro switch in the throttle assembly first.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2012 TXT 48v Solenoid Not Clicking - controller pin 12? | Electric EZGO | |||
Upgraded Controller, Solenoid, F&R SW202, issues clicking in neutral | Electric EZGO | |||
Need Help, just installed new controller and solenoid | Electric EZGO | |||
Installed controller and solenoid now it won't charge | Electric Club Car | |||
solenoid clicking, bad controller? | Electric EZGO |