|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-13-2009, 10:34 PM | #11 | |
Master BS'r
Join Date: Jul 2007
Location: S. Florida
Posts: 1,819
|
Re: vinyl seat adhesive needed.
Quote:
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-14-2021, 08:40 PM | #12 |
Not Yet Wild
Join Date: Jul 2021
Posts: 2
|
Re: vinyl seat adhesive needed.
Time to revive this old thread…
So my seat cushion Mostly became detached from the seat back on my 2006 club car precedent. I ended up cleaning both surfaces of all the old glue on the cushion and the seat back. I then scuffed them both up a little bit (very very carefully not heavy at all) then cleaned both surfaces with acetone. Then I proceeded to apply a bead to both the seat cushion, and the seat back, with “3M Scotch-Weld 1099 Nitrile High Performance Plastic Adhesive. Then I took duct tape, taped it to the cushion, then pulled it tight around to the back side of the seat back to let the 3M cure over night while it held the cushion tight to the seat back as pictured. I feel this is going to work pretty well since this adhesive seems like really good stuff. It says curing takes about 24hrs, so I’ll update tomorrow on the bond it created. |
04-16-2022, 12:35 AM | #13 |
Not Yet Wild
Join Date: Feb 2021
Posts: 2
|
Re: vinyl seat adhesive needed.
How’d it work? I’m experiencing the exact same thing with my Yamaha Drive G29 golf cart.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Vinyl Seat cleaning | Electric Club Car | |||
Used CC Enclosure 1994-1999 Vinyl w/Full Back CHEAP! | Golf Carts and Parts | |||
Seat Kit | Golf Carts and Parts | |||
Any tips on installing new vinyl seat covers? | Electric EZGO | |||
Seat | Golf Carts and Parts |