|
11-02-2019, 12:41 PM | #1 |
Not Yet Wild
Join Date: Nov 2019
Posts: 1
|
high speed only
after replacing a shorted out battery my ezgo Textron serial umber 624566 mfg Do391 thakes off in full high speed only. is it the solenoid or possibly controller issue.
|
11-11-2019, 08:00 AM | #2 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: high speed only
If it's a gas cart? it don't have a controller, sounds like a linkage to carburetor problem.
|
11-12-2019, 02:22 AM | #3 |
Nincompoop Club Member
Join Date: Jun 2016
Location: Idaho
Posts: 1,178
|
Re: high speed only
Yep, sounds like an electric buggy to me
|
11-12-2019, 10:54 AM | #4 |
Gone Wild
Join Date: Feb 2017
Location: Peachtree City, Georgia
Posts: 226
|
Re: high speed only
I have seen on some of the older serial motor type ezgo carts if the B- and M- are swapped on the controller it will cause the cart to take off like a batt out of hell once the solenoid engages. In this configuration you are supplying the motor with full pack voltage and effectively by-passing the controller.
Sent from my SM-S367VL using Tapatalk |
Tags |
only runs in high speed |
|
|
Similar Threads | ||||
Thread | Forum | |||
D&D PDS High Speed Motor and 8:1 High Speed Gear Experiment... | Electric EZGO | |||
High torque motor with high speed gears | On Road Golf Carts! | |||
High Speed or Stock Gears?...with High Torque Motor | Electric EZGO | |||
Loud noise and clicking at full speed on new high speed motor. | Electric EZGO | |||
1985 G1 Runs fine low speed , high speed run for a mile then fall on its face | Gas Yamaha |