|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-28-2016, 08:25 AM | #1 |
Gone Wild
Join Date: Dec 2015
Location: Texas
Posts: 526
|
Toggle switch
I purchased a toggle switch at auto parts store and the switch is rated for 15 A 120 VAC
I am going to run a led light bar that pulls 9 Amps. Will this switch be sufficient? Not sure how the 120VAC favors in using it on 12volt Accessory Battery. Sent from my Nexus 6 using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-28-2016, 08:33 AM | #2 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Toggle switch
Not sure how this would work either, I would setup like a test using your multimeter and check things before hooking up your light. Most auto parts stores sell normal 12V switches that are perfect for your setup.
|
05-28-2016, 08:39 AM | #3 |
Getting Wild
Join Date: Oct 2010
Location: Tavares, Florida
Posts: 121
|
Re: Toggle switch
If you're worried about it, wire a relay in. Should make it brighter anyway.
|
05-28-2016, 08:49 AM | #4 |
Gone Wild
Join Date: Dec 2015
Location: Texas
Posts: 526
|
Is there a difference in an AC switch and a switch rated for DC current?
The switch is a on off toggle switch and the only thing stamped on the switch is 15 A 120 VAC. I am guessing the VAC stands for AC current... Sent from my Nexus 6 using Tapatalk |
05-28-2016, 09:44 AM | #5 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,174
|
Re: Toggle switch
Yes there is a difference in current rating between AC and DC on a switch but that switch should work just fine.
|
05-28-2016, 01:00 PM | #6 |
Gone Wild
Join Date: Dec 2015
Location: Texas
Posts: 526
|
When buying switches for 12 Volt Accessory...
Is it better to have one that has screw terminals or spade terminals? If a switch is rated 15 amps for 120V AC, does that mean for 12V DC the switch can handle more Amps than 15? Sent from my Nexus 6 using Tapatalk |
05-28-2016, 01:36 PM | #7 |
Gone Wild
Join Date: Sep 2015
Posts: 572
|
Re: Toggle switch
As I understand it, DC power goes one way. (Direct) AC power goes both ways. (Alternating) As the power goes through a contact, it transfers alittle metal with it. Since AC current goes both ways, it doesn't ware out the contacts as quick. So a DC switch of the same rating will have heavier contacts.
Having said all that, I think you will be fine. I like screw terminals, but that's just me. |
05-28-2016, 02:46 PM | #8 |
Getting Wild
Join Date: Apr 2016
Location: Appleton WI
Posts: 83
|
Re: Toggle switch
It will work just fine. Your switch is rated above your needs for both amps and volts. That's exactly what you want.
|
05-28-2016, 10:03 PM | #9 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,174
|
Re: Toggle switch
The DC current rating for a switch or relay is actually lower than AC - you get more arcing when you open a DC connection.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
G1 2 post toggle switch | Gas Yamaha | |||
Radio and led toggle switch | Electric EZGO | |||
toggle switch on 1996 DCS | Electric EZGO | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car |