2004 G22E Controller Upgrade to Alltrax

Gtwo · 04-08-2016, 06:51 PM

I recently purchased a 2004 G22E that I was assured ran great. Of course I got home and it didn't. I replaced all of the batteries, f/r switch, key switch, accelerator safety switch, and solenoid. Solenoid does not click. I am assuming the controller (GE refurbished IC3645SH4V262Y1) is bad. I just want to confirm that I can just swap that one out with an Alltrax DCX400 (CON-DCX400G19) and not replace the motor (JU2-H1890-00)? And, do I need any special adaptors for the connections?

cgtech · 04-08-2016, 07:46 PM

Yes and Yes. Dcx needs an adapter board to plug yamaha harness in. Dcx needs field map 8 installed to work with stock GE motor. If you are going with a 400a or larger model, better cables throughout will be needed.

Gtwo · 04-08-2016, 08:16 PM

Thanks for the quick reply. I found a controller online that comes with the adapter board. And I see from the posts, that I will need to get 4ga wires. Fingers crossed...

04-08-2016, 06:51 PM	#1
Gtwo Not Yet Wild Join Date: Apr 2016 Posts: 2	2004 G22E Controller Upgrade to Alltrax I recently purchased a 2004 G22E that I was assured ran great. Of course I got home and it didn't. I replaced all of the batteries, f/r switch, key switch, accelerator safety switch, and solenoid. Solenoid does not click. I am assuming the controller (GE refurbished IC3645SH4V262Y1) is bad. I just want to confirm that I can just swap that one out with an Alltrax DCX400 (CON-DCX400G19) and not replace the motor (JU2-H1890-00)? And, do I need any special adaptors for the connections?
Gtwo Not Yet Wild Join Date: Apr 2016 Posts: 2

04-08-2016, 07:46 PM	#2
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: 2004 G22E Controller Upgrade to Alltrax Yes and Yes. Dcx needs an adapter board to plug yamaha harness in. Dcx needs field map 8 installed to work with stock GE motor. If you are going with a 400a or larger model, better cables throughout will be needed.

04-08-2016, 08:16 PM	#3
Gtwo Not Yet Wild Join Date: Apr 2016 Posts: 2	Re: 2004 G22E Controller Upgrade to Alltrax Thanks for the quick reply. I found a controller online that comes with the adapter board. And I see from the posts, that I will need to get 4ga wires. Fingers crossed...
Gtwo Not Yet Wild Join Date: Apr 2016 Posts: 2

Similar Threads
Thread	Forum
Club Car Precedent Alltrax controller upgrade	Extreme DC!
2004 Yamaha G22E ??	Electric Yamaha
Motor or Controller upgrade for G22e	Electric Yamaha
Club Car IQ controller upgrade to alltrax dcx600	Electric Club Car
alltrax controller help on ez go pds 2004	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum