|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-20-2021, 01:58 PM | #1 |
Not Yet Wild
Join Date: Jun 2020
Posts: 16
|
Upgrade/Troubleshooting Help
I bought a 2010 EXGO TXT and it is all but dead. I am assuming I have a regen motor. It came with a motor with A1, A2, F1 and F2 terminals with a DCX 400PDS Alltrax controller which is also dead. I got a hold a series motor (A1,A2,S1 and S2). My question is do I upgrade the motor and controller or can I get by with the series motor and upgrade controller. The cart does have a tow/run switch. Thanks advance for the help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-20-2021, 04:08 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Upgrade/Troubleshooting Help
Series and Sepex are 2 very different types of drive systems. The controllers and motors are not interchangeable under any circumstance. The cart will either have a complete series or a complete sepex drive system.
PDS is Sepex. The Motor terminals will be marked A1, A2, F1, F2 |
10-20-2021, 04:48 PM | #3 |
Not Yet Wild
Join Date: Jun 2020
Posts: 16
|
Re: Upgrade/Troubleshooting Help
Thanks Scotty. I’m ordering the 48 volt Plum Quick Barracuda motor. Which controller would you suggest to pair this with.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Troubleshooting after Controller upgrade on TXT 48v | Electric EZGO | |||
Help me decide ... Controller upgrade or Motor Upgrade? | Electric Club Car | |||
06 precedent 2G cable upgrade along with Alltrax 500 upgrade | Electric Club Car | |||
Drive Train Upgrade After Wheel Upgrade? | Electric Club Car | |||
Total Charge 1 troubleshooting/upgrade | Electric EZGO |