|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-15-2020, 01:30 PM | #1 |
Gone Wild
Join Date: May 2012
Location: Central Fl
Posts: 187
|
2008 Precedent Alltrax Install Question
I am hooking up Alltrax XCT 400 controller I got from Scotty B. His email says he.out of town so posting here. But the Green and White wires have been cut at both ends and were not used before. These were for the run/tow switch I guess. The previous owner must have bipassed it as the switch itself is gone too.
How do I hook it up without these 2 wires? Just disregard them and wire the rest up? See pics when hooked up before i removed stock controller. And pic showing white and green wires cut. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-16-2020, 09:39 AM | #2 |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: 2008 Precedent Alltrax Install Question
Don't see pictures.
If it were me, I would get a new run/tow switch before hooking anything up. |
02-16-2020, 11:32 AM | #3 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: 2008 Precedent Alltrax Install Question
Wires at the tow run switch should be Pink and Light Green if I remember right. You don't necessarily "need" a tow run switch, but if you want one, any weatherproof 20amp toggle switch will work. In the meantime if those wires are pink and light green, they can be taped together to allow the controller to work.
|
02-16-2020, 11:54 AM | #4 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: 2008 Precedent Alltrax Install Question
You definitely need a tow/run switch, it is necessary to be off when connecting and disconnecting batteries to prevent controller damage, working on the dash or towing the cart.
|
02-22-2020, 01:42 PM | #5 |
Gone Wild
Join Date: May 2012
Location: Central Fl
Posts: 187
|
Re: 2008 Precedent Alltrax Install Question
I installed my own run/tow switch.
CC precedent new XCT400 install and new 400amp solenoid. Stutters and wont move after install. Stuttering forward in reverse and stuttering reverse in forward. Low voltage and precharge errors from controller but everything was installed correctly and pack is 52v+. My problem was the diode on the small posts of the solenoid. I removed it and the cart and controller work fine now. The large post solenoid is there still. Just an FYI for future use if others have this issue. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax XCT 500 Install 2015 Club Car Precedent Question | Electric Club Car | |||
Club Car Precedent - Alltrax Install | Electric Club Car | |||
06 Precedent Alltrax and Solenoid Install | Electric Club Car | |||
2008 Precedent Speed magnet install | Electric Club Car | |||
2008 precedent stereo install | Electric Club Car |