|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-07-2009, 08:53 PM | #11 |
Not Yet Wild
Join Date: Dec 2008
Location: Normangee,Tx
Posts: 47
|
Re: RCC Exhaust - Is anyone running?
Where's Mike's muffler mod. located,
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-08-2009, 12:18 AM | #12 |
Gone Wild
Join Date: Oct 2008
Location: Out past the Creek, Arizona
Posts: 856
|
Re: RCC Exhaust - Is anyone running?
I cant remember,it's buried in another post.
I changed mike's just a bit. Here ya go. With the stock muffler you remove the tube from the top of the muffler. I cut it off with a saws all and then welded a thick washer over the top and welded the hole in the washer. Mike cuts a hole in the bottom and installs a 1 1/2 inch 90 deg tube. I cut a hole in the side about 1/2 to 3/4 inch up from the bottom in the side of the can and use a 1 1/2 inch diameter straight tube about 3 inches long aimed at the back of the cart. Just under the rear axle.I cut it in the side to gain more ground clearance. I'll try and find the camera tomorrow and add some pictures. Last edited by Quadmaster; 02-08-2009 at 12:19 AM.. Reason: add content |
02-08-2009, 08:32 AM | #13 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: RCC Exhaust - Is anyone running?
|
02-08-2009, 08:34 AM | #14 | |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: RCC Exhaust - Is anyone running?
Quote:
|
|
02-08-2009, 09:11 AM | #15 | |
Gone Wild
Join Date: Sep 2007
Location: maine
Posts: 3,352
|
Re: RCC Exhaust - Is anyone running?
Quote:
|
|
02-08-2009, 11:01 PM | #16 |
Gone Wild
Join Date: Oct 2008
Location: Out past the Creek, Arizona
Posts: 856
|
Re: RCC Exhaust - Is anyone running?
|
02-09-2009, 10:05 PM | #17 | |
Gone Wild
Join Date: Oct 2008
Location: Out past the Creek, Arizona
Posts: 856
|
Re: RCC Exhaust - Is anyone running?
Quote:
|
|
02-09-2009, 10:11 PM | #18 |
Gone Wild
Join Date: Oct 2008
Location: Out past the Creek, Arizona
Posts: 856
|
Re: RCC Exhaust - Is anyone running?
It should be noted that my cart is lifted. In the pictures my tail pipe is on the very bottom. This works but if you do it like i have it. When you drill through the side of the can you will cut into the bottom of the 2nd layer of the can. ( It's Double Walled ) . There is no problem in doing this.
I used a 1 3/8 dia hole saw to cut the hole in the side. That way when you put your tail pipe on it just fits over the hole and makes it easy to weld. |
02-09-2009, 10:35 PM | #19 | |
doin it in the desert
Join Date: Dec 2008
Location: Sonora Desert,Az
Posts: 5,603
|
Re: RCC Exhaust - Is anyone running?
Quote:
|
|
02-09-2009, 11:07 PM | #20 | |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: RCC Exhaust - Is anyone running?
Quote:
|
|
|
||
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
hi!! exhaust? | Gas Yamaha | |||
Looking for used stock exhaust | Golf Carts and Parts | |||
CC Exhaust Upgrade | Big Block Talk! | |||
18 hp exhaust | Big Block Talk! | |||
Exhaust | Gas EZGO |