|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
|
08-27-2019, 02:55 PM | #1 |
Not Yet Wild
Join Date: Aug 2019
Posts: 4
|
Yamaha Serial/Manufacture Date Question
Recently purchased a G29. Serial number indicates 2009 model and date of manufacture shows 2012. Can someone tell me why these may differ? Thanks for the help!
|
08-27-2019, 03:00 PM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: Yamaha Serial/Manufacture Date Question
Someone changed the body.
It's an '09, and probably non- PTV |
08-27-2019, 03:34 PM | #3 |
Not Yet Wild
Join Date: Aug 2019
Posts: 4
|
Re: Yamaha Serial/Manufacture Date Question
|
08-27-2019, 04:13 PM | #4 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: Yamaha Serial/Manufacture Date Question
By the serial number. Unless PTV can be added later on...Don't know about that.
https://www.golfcartgarage.com/what-...aha-golf-cart/ |
08-27-2019, 03:29 PM | #5 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Yamaha Serial/Manufacture Date Question
Yep, body swapped. It's an '09 as stated above.
|
08-28-2019, 01:33 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Yamaha Serial/Manufacture Date Question
PTV can be added later. Controller reprogramming with unique key will unlock 19mph speed (on electric models), and head/tail lights, mirror, and reflectors round out the package.
|
08-28-2019, 03:27 PM | #7 |
Not Yet Wild
Join Date: Aug 2019
Posts: 4
|
Re: Yamaha Serial/Manufacture Date Question
Thanks for the info guys! One more question for ya: Can a lug bolt be hammered into the hub on a 2009 Yamaha G29 cart? One of the hubs is missing a lub bolt. Wasnt sure if it could be hammered in or machine pressed. Thanks in advance.
|
08-28-2019, 07:19 PM | #8 |
Not Yet Wild
Join Date: Aug 2019
Posts: 4
|
Re: Yamaha Serial/Manufacture Date Question
Here’s a pic of it. PTV?
|
08-28-2019, 04:47 PM | #9 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: Yamaha Serial/Manufacture Date Question
I use an old lugnut, a bit of oil and an old wheel bearing from a 4wheeler but you can use a washer or two as well.
Pull the stud through the hub and put some oil on the threads. Put on a couple thick washers and put the lug nut on backwards (flat side against the washers). Then an impact gun will.press it in. If you dont have an impact gun, you can use a ratchet. And use a big pry bar between 2 of the other studs and rest against the ground to lock the hub in place |
08-29-2019, 10:36 AM | #10 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Yamaha Serial/Manufacture Date Question
Looks like it to me.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Serial number vs date code | Electric EZGO | |||
date of manufacture for my ezgo golf cart | Electric EZGO | |||
Serial numbers to date of manufacture. | Electric EZGO | |||
Battery manufacture date? | Electric EZGO | |||
Date of Manufacture | Electric Club Car |