10-26-2015, 10:09 AM | #1 |
Gone Wild
Join Date: Apr 2015
Location: Athens, GA
Posts: 349
|
Wheel offset
Starting to look at tire/wheel combos for CC DS w/ 6" lift and fender flares.
Thinking along the lines of either 22" or 23" and don't know what I should be looking for on the offset. Some I see said 2:5 offset. Any recommendations/condiderations? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-26-2015, 04:58 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Wheel offset
Most of the vendors I buy tires and wheels from don't even list the off-set anymore. 5:2 is pretty much the standard for a 14" rim and most 12" rims. If you wanted a 4:3 you'd have more options in the 10" size. For the tires and wheels I sell as a general rule of thumb, wheel and tire packages are designed to sit as close to the spindle and steering parts as possible without interfering with them. We carry a few wheels that have zero off-set but they must be used with wheel spacers to make them work.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Wheel Offset | Electric Club Car | |||
Wheel offset - what does that mean??? | Electric Club Car | |||
Et 25 wheel offset? | Gas Yamaha | |||
wheel offset | Gas EZGO | |||
Wheel offset? | On Road Golf Carts! |