|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-06-2019, 11:24 PM | #261 |
Not Yet Wild
Join Date: Sep 2019
Posts: 10
|
Re: Installing HEI Ignition on 3PG Carts
The term is GM's wording for a High Energy Ignition. Fords was Duraspark. And so on.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-02-2019, 08:57 PM | #262 |
Not Yet Wild
Join Date: Jun 2019
Posts: 16
|
Re: Installing HEI Ignition on 3PG Carts
I have a 1988 ezgo gas golf cart that is 2pg will this work?
|
10-02-2019, 08:58 PM | #263 |
Not Yet Wild
Join Date: Jun 2019
Posts: 16
|
Re: Installing HEI Ignition on 3PG Carts
1988 ezgo gas golf cart add hei module need to know how.
|
10-02-2019, 08:59 PM | #264 |
Not Yet Wild
Join Date: Jun 2019
Posts: 16
|
Re: Installing HEI Ignition on 3PG Carts
Need to wire my 1988 ezgo gas golf cart to change to hei module.
|
10-02-2019, 09:16 PM | #265 |
Not Yet Wild
Join Date: Jun 2019
Posts: 16
|
Re: Installing HEI Ignition on 3PG Carts
Will this work on a 2pg 1988 ezgo?
|
10-02-2019, 11:53 PM | #266 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,489
|
Re: Installing HEI Ignition on 3PG Carts
It's the exact same wiring diagram
|
10-03-2019, 09:12 AM | #267 |
Not Yet Wild
Join Date: Jun 2019
Posts: 16
|
Re: Installing HEI Ignition on 3PG Carts
Do you have a picture of it hooked up?
|
10-04-2019, 10:30 AM | #268 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,489
|
Re: Installing HEI Ignition on 3PG Carts
The module has 4 flat bladed connectors, but there are 5 wires.
W, and G connect to the red, and blue wires from the pulsar. You will have to switch them to see which way runs the best. All modules are different. C connects to the coil - (negative). B connects to the solenoid D + (power) The fifth wire is attached to the module mounting screw, and to ground. Your best bet is to start a new thread, and tell us what your symptoms are before wasting your time on this conversion. |
03-24-2020, 06:37 PM | #269 |
Not Yet Wild
Join Date: Apr 2015
Posts: 11
|
Re: Installing HEI Ignition on 3PG Carts
I need some help from the experts. I also have a 3pg and did the HEI conversation. At first the cart would not pickup RPMs and the muffler would get really hot. So I researched and swapped the red and blue wires. Now it picks up RPMs but has kind of a skip and drives very slow. Please help. Here is a list of new parts.
New cylinder and rings. Compression is over 120 psi. New carburetor New Fuel pump New primary clutch Recently BBQ the muffler New spark plug Here is the link to a video of the engine running. https://www.youtube.com/watch?v=vYRCGoPOf2o |
03-29-2020, 06:12 PM | #270 | |
Not Yet Wild
Join Date: Oct 2015
Posts: 58
|
Re: Installing HEI Ignition on 3PG Carts
Quote:
.. mines mounted to a 5/8in block of aluminum as a heat sink. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Top Notch Carts, Edinburgh, Indiana. Carts I've built. | Members Rides | |||
Yamaha G9-Ignition Coil & Ignition Switch-Help | Gas Yamaha | |||
Installing a DCX 400 | Electric EZGO | |||
Carts, carts, carts!!!-'01 EZ GO-$1300.00!!?? | Golf Carts and Parts | |||
Installing Light Kit G16 | Gas Yamaha |