|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-10-2020, 03:11 PM | #1 |
Not Yet Wild
Join Date: Sep 2019
Posts: 3
|
Adjusting governor on a EFI cart
I have a 2019 Ezgo Express S4. My first fuel injected cart. How do I get more speed out of it? Do I adjust the throttle like I would on a carbed one?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-24-2020, 09:43 AM | #2 |
Not Yet Wild
Join Date: Oct 2020
Posts: 1
|
Re: Adjusting governor on a EFI cart
Looking for same.
|
10-28-2020, 08:43 AM | #3 |
Not Yet Wild
Join Date: Jun 2020
Posts: 1
|
Re: Adjusting governor on a EFI cart
You have to adjust the throttle and governor plates on the fuel injection carts
|
12-10-2020, 01:44 AM | #4 |
Not Yet Wild
Join Date: Dec 2020
Posts: 10
|
Re: Adjusting governor on a EFI cart
Any more info on this ?? I did took about 1/2" of slack out throttle cable and first time going WOT the cart shut down and engine light came on and was staying on not flashing any code or pattern even after turning the key on 3 times. The cart was around 19 mph before and seen 22 on the gps and then it shut down. I was WOT for a total of 10 sec and then it happed. Any info would be appreciated
|
12-14-2020, 04:35 PM | #5 |
Not Yet Wild
Join Date: Aug 2018
Posts: 3
|
Re: Adjusting governor on a EFI cart
Nobody?
|
12-15-2020, 10:36 AM | #6 |
Not Yet Wild
Join Date: Aug 2018
Posts: 3
|
Re: Adjusting governor on a EFI cart
After messing around with mine I was able to adjust the throttle cable and get about 25 mph out of it. There are two cables running to the back by the rear end. the thicker cable is for the forward reverse switch and the other is for the governor. I got 3-4 turns of adjustment, I could probably go more, just don't want to over rev the motor.
|
05-23-2023, 03:54 AM | #7 |
Not Yet Wild
Join Date: May 2023
Posts: 4
|
Re: Adjusting governor on a EFI cart
H, I have a 2019 EZGO txt gas EFI
I've 'youtubed' it and adjusted the 2 nuts on the cable with the spring, under the engine cover, but it is surging. I tried a few different settings but it doesn't really seem any/much quicker! Am I doing something wrong? Do I need to adjust the adjacent 'lever' as well /or instead or do anything else???? Help appreciated, Cheers, Evan |
05-23-2023, 02:57 PM | #8 |
Not Yet Wild
Join Date: May 2023
Posts: 4
|
Re: Adjusting governor on a EFI cart
apologies apparently Im not allowed to add my own EFI governor/speed problem as such :-(
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Adjusting governor | Gas Club Car | |||
Need help adjusting governor!!! | Gas EZGO | |||
Adjusting the Governor | Gas EZGO | |||
Adjusting governor | Gas EZGO | |||
Adjusting governor ? | Gas EZGO |