Will Speed Code 4 work if a high speed magnet does not?

[TahoeDawgZ71]

Originally Posted by JordanMLucas

Thank you Sergio and TahoeDawg for your assistance. I will try to locate someone in my area with that handset. When someone does scan the cart with the Curtis IQDM-P will that simply diagnose the cart or will it also allow programming access that may allow the magnet to work effectively? My controller, solenoid, and batteries are all still under warranty for another 16 months so if there are any issues I can have any one of them replaced. I appreciate the ongoing support!

The magnet is working. If the magnet wasn't working. The cart would be in limp mode. Please see post #15 in your previous post where I explained to you how the magnet works to increase speed...

http://www.buggiesgonewild.com/elect...-faster-2.html

[Unicorn]

TahoeDawg, I guess I am just confused as to what could be wrong with the controller to limit the cart to 14mph even with the magnet working as you say. Is it more of a controller programming issue or a potential faulty connection/part within the controller? I mean, what could possibly come up in a scan to account for this?

[TahoeDawgZ71]

Originally Posted by JordanMLucas

TahoeDawg, I guess I am just confused as to what could be wrong with the controller to limit the cart to 14mph even with the magnet working as you say. Is it more of a controller programming issue or a potential faulty connection/part within the controller? I mean, what could possibly come up in a scan to account for this?

Throttle percentage input, armature current, speed pulses, total battery voltage, among other things.

[Unicorn]

Thanks. I would like to make it out to you. If you get a chance send me a PM of what you would charge me to look at my cart and diagnose. It isn't a perfect cart but I also don't have a ton of money to pour into it. I may have some time in the next two weeks as I have spring break because I work for a school district. Thanks. If PM doesn't work I can call.

[TahoeDawgZ71]

Originally Posted by JordanMLucas

Thanks. I would like to make it out to you. If you get a chance send me a PM of what you would charge me to look at my cart and diagnose. It isn't a perfect cart but I also don't have a ton of money to pour into it. I may have some time in the next two weeks as I have spring break because I work for a school district. Thanks. If PM doesn't work I can call.

I won't charge you anything to plug the scanner into it and diagnose it. I feel very confident I'm going to find a bad MCOR, but there's only one way to find out. You can text or email me anytime you like. Phone number and email address are on the website.

[2016CTD]

Originally Posted by TahoeDawgZ71

I won't charge you anything to plug the scanner into it and diagnose it.

That is awesome customer service!

[TahoeDawgZ71]

Originally Posted by 2016CTD

That is awesome customer service!

I try. Thanks.


Sent from my iPhone using Tapatalk

[kgsc]

I think Chuck Town's spring break is different than ours but watch for Masters traffic in Augusta.

[Unicorn]

Just as an update. I went to get speed code 4 programmed instead of using a high speed magnet. Went to a Club Car authorized dealer. They showed me the scanner that stated it was now set to speed code 4, provided the documentation of the code numbers, and I paid, BUT, when I got home the car was still running at speed code 3 (14mph). Any ideas? I posted this question in another thread as well. Everything checks out on the cart so I don't get it. Any help appreciated.

[mrgolf]

Ask them to show you the 19.6 mph you get with speed code 4 did it go 14 before they changed it?

On edit I re-read thread. You must have a bad mcor or a lot of slop in the linkage. With high speed magnet speed code 4 will have no effect.