98 Party Time DS

Dave Hooge · 01-31-2016, 07:56 PM

I am new to this site and hoping to get some help with the wiring on my 1998 Club Car DS. My first golf cart project and I'm excited about turning my CC from plain to awesome.

Dave Hooge · 01-31-2016, 08:44 PM

I'm in big trouble. I bought a 1998 36V Electric DS that worked ok before I took it apart. I took the body off for paint and I thought I would do some upgrades in the wiring. When I got the cart it only had two speeds. Low and High.

Someone in the past has done some upgrade and I don't think it was done correctly. I tried to find a diagram online that matched and nothing matched. Here is a list of the parts on the cart.

GE 5BC49JB1115 Motor

1016109-01 V-Glide

1204-027 FSIP Controller

586-117111 White and Rodgers Solenoid

6 inch lift with 23X10.50-12 Wheels and Tires

All of the diagrams I have seen show 3 micro switches on the FWD/REV switch and some that come close show an OBC that I don't have. I have only one and appearance wise, all it ever had. Do you have a diagram that I can use? Seems like I'm missing something or what I have isn't compatible. I'm open for recommendations as long as they don't break the bank. My wife says I've already spent too much and given me a deadline to finish. She wants it for Mardi Gra parade starting the 5th of Feb. I would greatly appreciate any help you can give me.

01-31-2016, 10:22 PM

look at the serial number it may not be a 98
36v does not have a OBC
98 has the three micro switches

here is the wiring diagram

tag50 · 01-31-2016, 10:43 PM

3 micro switches at the bottom, far right of the diagram. (93+94)

01-31-2016, 10:46 PM

you are correct i was thinking the resistor coil cart
looking at your f/r switch it seems there are a blue wire and black together

tag50 · 01-31-2016, 10:50 PM

Also missing a diode across the small posts of the solenoid.

.

tag50 · 01-31-2016, 11:12 PM

Since the F+R s/w pictured doesn't have the necessary cams for a 3 micro s/w set, my guess would be someone put in the wrong F+R s/w and made the cart work without a reverse alarm or half speed reverse.

.

T1no33 · 08-01-2016, 09:13 AM

Was there ever any resolution to this? I just picked up a 88 club car, it has a series motor and looks like someone did upgrades incorrectly because it appears to be set up as a 36V V-Glide and the coils have been removed.

TahoeDawgZ71 · 08-01-2016, 11:27 AM

Quote:

Originally Posted by T1no33

Was there ever any resolution to this? I just picked up a 88 club car, it has a series motor and looks like someone did upgrades incorrectly because it appears to be set up as a 36V V-Glide and the coils have been removed.

I sold him a solenoid, diode, and an F&R switch on Feb 12th and haven't heard from him. I'm guessing it took care of his issues.

T1no33 · 08-01-2016, 01:57 PM

Quote:

Originally Posted by TahoeDawgZ71

I sold him a solenoid, diode, and an F&R switch on Feb 12th and haven't heard from him. I'm guessing it took care of his issues.

Not trying to highjack but I might be getting similar from you myself. I checked out your site and looks good. I'm brand new to this so I'm doing all the reading I can.

01-31-2016, 07:56 PM	#1
Dave Hooge Not Yet Wild Join Date: Jan 2016 Posts: 2	98 Party Time DS I am new to this site and hoping to get some help with the wiring on my 1998 Club Car DS. My first golf cart project and I'm excited about turning my CC from plain to awesome.
Dave Hooge Not Yet Wild Join Date: Jan 2016 Posts: 2

01-31-2016, 10:22 PM	#3
crash test dummy Guest Posts: n/a	Re: 98 Party Time DS look at the serial number it may not be a 98 36v does not have a OBC 98 has the three micro switches here is the wiring diagram
crash test dummy Guest Posts: n/a

01-31-2016, 10:43 PM	#4
tag50 Gone Wild Join Date: Apr 2014 Location: Oregon City, Or Posts: 1,977	Re: 98 Party Time DS 3 micro switches at the bottom, far right of the diagram. (93+94)

01-31-2016, 10:46 PM	#5
crash test dummy Guest Posts: n/a	Re: 98 Party Time DS you are correct i was thinking the resistor coil cart looking at your f/r switch it seems there are a blue wire and black together
crash test dummy Guest Posts: n/a

01-31-2016, 10:50 PM	#6
tag50 Gone Wild Join Date: Apr 2014 Location: Oregon City, Or Posts: 1,977	Re: 98 Party Time DS Also missing a diode across the small posts of the solenoid. .

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-31-2016, 11:12 PM	#7
tag50 Gone Wild Join Date: Apr 2014 Location: Oregon City, Or Posts: 1,977	Re: 98 Party Time DS Since the F+R s/w pictured doesn't have the necessary cams for a 3 micro s/w set, my guess would be someone put in the wrong F+R s/w and made the cart work without a reverse alarm or half speed reverse. .

08-01-2016, 09:13 AM	#8
T1no33 Not Yet Wild Join Date: Jul 2016 Location: Spring Hill, Fl Posts: 20	Re: 98 Party Time DS Was there ever any resolution to this? I just picked up a 88 club car, it has a series motor and looks like someone did upgrades incorrectly because it appears to be set up as a 36V V-Glide and the coils have been removed.

Similar Threads
Thread	Forum
Party Time!!!!	Announcements
BGW Birthday Party	Announcements