|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
01-19-2023, 10:45 AM | #231 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: Planning Engine Swap
Is this red wire the magneto kill wire?
There's also a small tab with threads on it......would this be a ground or? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-19-2023, 10:56 AM | #232 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,173
|
Re: Planning Engine Swap
Pretty sure red is 12v dc out from the regulator. The threaded tab is the kill wire connection.
|
01-19-2023, 01:35 PM | #233 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: Planning Engine Swap
KGSC is correct, the threaded tab goes up to your coils to kill the engine the red wire with the connector at the end connect to your battery to keep it charged
|
01-19-2023, 03:33 PM | #234 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: Planning Engine Swap
Great into thanks
|
01-19-2023, 08:35 PM | #235 | |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: Planning Engine Swap
Quote:
The other two bolts were way too long |
|
01-19-2023, 08:37 PM | #236 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: Planning Engine Swap
Looks like the wiring harness going to the two coils are connected and hooked up to the tab for the kill switch
|
01-19-2023, 08:39 PM | #237 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: Planning Engine Swap
I need two shorter bolts in order to mount the engine to the billet plate
Two supplied bolts with the kit worked and two are too long Engine is in.....just need to tighten the plate to the cradle frame, align the engine and tighten the 4 bolts down |
01-19-2023, 08:47 PM | #238 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: Planning Engine Swap
Should the clutches be exactly lined up with each other?
Definitely glad I want to order the exhaust manifold |
01-19-2023, 10:51 PM | #239 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: Planning Engine Swap
I think the air filter assembly needs to be turned around 180°
|
01-20-2023, 08:35 AM | #240 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: Planning Engine Swap
What about an engine grounding strap to the frame?
I'm thinking its a good idea to measure and to make one |
|
|
Similar Threads | ||||
Thread | Forum | |||
Planning out the dash... | Electric EZGO | |||
Planning on G14 | Electric Yamaha | |||
Planning a motor upgrade. NEED HELP | Big Block Talk! | |||
86 club car engine swap. What engine? | Gas Club Car | |||
Who's planning on modding their carts? | Star and Fairplay |