Quote:
Originally Posted by Kave_Man
I disconnected the four cables that went to the posts on the motor when I tested the continuity, but it was still mounted on the cart (rear end). Does that make a difference? Sorry I didn't mention that in orignal post. In response to Shadowman, The solenoid clicks, double-checked v-glide, power to the motor. It was just wierd how it just woulndn't run again after running just fine. Could it be dirt or debris in the motor from being off-road causing this problem? I don't beat my cart up but who knows about the previous owner(s).
|
S1 to S2 must have continuity. So must A1 to A2. You can leave the motor on to test. If you want to test run the motor, it must be mounted on the axle! Here's a diagram to test run the motor using 12V:
Go down to post #6.
http://www.buggiesgonewild.com/elect...ller-shot.html