Quote:
Originally Posted by NoleFan4Ever
Here is the drawing for it. The Gray wire should be powering the controller, but not with the switch in Tow. But if there is a short somewhere it will still pull - Is there anything else (wiring) on the controller side of the main solenoid except the Yellow cable and resistor? Is there anything else connected at B+ except the Yellow cable from the solenoid and the Green A1 cable?
|
So I triple checked just to make sure. Yellow from controller side post of solenoid goes from solenoid directly to B+ along with Green to A1. Motor connections wired correct per diagram. Nothing else connected to B+ other than yellow/green.