Buggies Gone Wild Golf Cart Forum - View Single Post - Adding a 3 gang LED rocker switch to 2009 club car precedent

Rooster59 · 08-14-2018, 08:17 PM

It seems to me all the illuminated switches I have installed need a wire from the switch to ground for the led to light up. The screen shot you posted is too low res for me to see what the wires run to.

There should be three poles. Power in, power out, and ground on each switch.

If it is backlit as well as lit when on then it may need two ground poles per switch.

08-14-2018, 08:17 PM	#2
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: Adding a 3 gang LED rocker switch to 2009 club car precedent It seems to me all the illuminated switches I have installed need a wire from the switch to ground for the led to light up. The screen shot you posted is too low res for me to see what the wires run to. There should be three poles. Power in, power out, and ground on each switch. If it is backlit as well as lit when on then it may need two ground poles per switch.