Multi-step Potentiometer for 95 CC
Getting ready for upgrades to my 95 CC Series cart and while testing the Multi-step Potentiometer to determine whether my cart was 0-5k or 5k-0, I noticed 0 ohms with no throttle depressed and increasing ohms as I depressed the pedal, indicating 0-5k system. However, as pedal travel neared full down, I noted only about 1900 ohms (1.9 k) and then at full down, the meter went to infinity!
Cart has been running normally, but should I see this as a potential (no pun intended here) problem? Is my potentiometer going bad?
|