Quote:
Originally Posted by kgsc
It is very possible that cart was made in 2 configurations, a 36 or 48. Tray would be common but only used 6 holes if 36 and would use the same motor for both. You might be able to program the controller to run on 48 but not sure.
|
Without confusing things for this fellow, let's just say if it came from the factory running 36v it had a 36v motor in it. If it came from the factory running at 48v, it had a 48v motor in it. I am quite sure they did not run a 48v motor at 36v.