View Single Post
Old 10-10-2019, 09:39 PM   #5
Mustang4249
Not Yet Wild
 
Join Date: Oct 2019
Posts: 8
Default Re: 2010 Precedent not doing anything!

I did change the controller and it stopped the pre heat resistor from getting hot in tow mode and all. But It still won't run. Solenoid isn't kicking in at all. I check the motor for continuity and has it from F1-f2 but not A1 to A2 but also don't from F1 to motor or A1 to motor. I did take all wires off and jump A1 F1 A2 F2 and hook power up from 12v batter to make motor run and it did. Could the mcor possibly be bad and keep it from doing anything. Back up buzzer doesn't even come on but not sure if it's good or not didn't worry about checking it with all the other problems I had.
Mustang4249 is offline   Reply With Quote