View Single Post
Old 07-27-2018, 04:48 PM   #7
bubba4dad
Not Yet Wild
E-Z-GO
 
Join Date: May 2018
Location: Alvin, Texas
Posts: 59
Default Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor?

I did not reset mine to default.
When I finished the installation I took it for its break in drives. All three ml3 switch positions resulted in the same top speed of 28.4 mph. I questioned this and figured it might be due to the 8 pole setting. I have since switched it to 4 pole and it seems to be working correct on mode 1 or “normal” as it runs right at 3000 rpm and a speed of about 15 mph. Mode 2 increases the rpm to about 3500 or approximately 19 mph. Mode 3 actually goes up to about 4000 rpm or about 24 mph and then slows down to about 3500 rpm and a speed of about 19.
The field map loaded is RHMOT-B2-V4.
So I’m back to being confused again.
Still need help!
bubba4dad is offline   Reply With Quote