Buggies Gone Wild Golf Cart Forum - View Single Post - Just finished rear lift kit in my Par Car!

yeagisyeag · 10-12-2015, 01:23 PM

I agree, longer shocks would work out better, I'm just not sure how to go about finding them.

I just tore down the front end of my cart today. It looks like bolting a block between the spring and frame would be an easy lift. the limiting factor is the steering rack position, those tie rods are already at an extreme angle. I'm going to try a 1" lift block, hopefully it won't be too much and put them in a bind.

If anyone can take a look under their cart for me, I'd like to see if anyone else is missing the left rear bolt on the spring mount. Mine only had 3 bolts. Doesn't look like there's any room for the bolt head under the rack. I'm going to put one in there, but cut part of the head off to clear.

Jim

10-12-2015, 01:23 PM	#3
yeagisyeag Not Yet Wild Join Date: Apr 2013 Posts: 9	Re: Just finished rear lift kit in my Par Car! I agree, longer shocks would work out better, I'm just not sure how to go about finding them. I just tore down the front end of my cart today. It looks like bolting a block between the spring and frame would be an easy lift. the limiting factor is the steering rack position, those tie rods are already at an extreme angle. I'm going to try a 1" lift block, hopefully it won't be too much and put them in a bind. If anyone can take a look under their cart for me, I'd like to see if anyone else is missing the left rear bolt on the spring mount. Mine only had 3 bolts. Doesn't look like there's any room for the bolt head under the rack. I'm going to put one in there, but cut part of the head off to clear. Jim
yeagisyeag Not Yet Wild Join Date: Apr 2013 Posts: 9