Buggies Gone Wild Golf Cart Forum - View Single Post

bboyter · 10-26-2008, 07:12 PM

I will take some pictures of it. I originally had the one barrell on my 18 and ordered the two barrell from performancevtwins. It really helped my cart in the mid range but it did not help it on top end that much. When I got the EC carb it looks like it was really setup for a push pull throttle from a mower. It had a similar body but the throttle adjustement screw was on the carb itself, on my two barrell (mikuni) that I got from performance vtwins the throttle adjustment was on the 90 degree turn down. I had to cut off the throttle adjustment on the new carb and then grind down the carb throttle lever so that the arm would fit on it. I then put performance v twins air filter adapter back on it. As you have seen by Franks Carb pic it has the throttle liine hole in it that hooks up to the throttle lever. I will take a pic in a few and post it later this evening.

10-26-2008, 07:12 PM	#5
bboyter Getting Wild Join Date: Oct 2008 Location: Texas Posts: 95	Re: 20hp Briggs "stumbles" on aceleration ? I will take some pictures of it. I originally had the one barrell on my 18 and ordered the two barrell from performancevtwins. It really helped my cart in the mid range but it did not help it on top end that much. When I got the EC carb it looks like it was really setup for a push pull throttle from a mower. It had a similar body but the throttle adjustement screw was on the carb itself, on my two barrell (mikuni) that I got from performance vtwins the throttle adjustment was on the 90 degree turn down. I had to cut off the throttle adjustment on the new carb and then grind down the carb throttle lever so that the arm would fit on it. I then put performance v twins air filter adapter back on it. As you have seen by Franks Carb pic it has the throttle liine hole in it that hooks up to the throttle lever. I will take a pic in a few and post it later this evening.