[Eric the Ewok]

Micro Switch.

I can't get my head round how this should be wired - the wiring diagram is not clear what connects to what at the switch. The switch has common, normally open and normally closed.

Connections to it are permanent 12v (from circuit breaker) and then blue and orange both off to the key switch.

Anyone point me in the right direction?

After a bit more digging I see you use Normally closed and common. So looking at the wiring diagram the blue is permeant live all the way to the key switch and orange is energised when the accelerator is pressed. Does that sound right? That would mean the buzzer sounds as soon as you switch to reverse I think.


Cheers, Eric.