View Single Post
Old 12-06-2016, 08:37 AM   #6
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: 36v to 48v conversion on 2000 ds club car.

Since the cart starts off at full throttle you will need to test the throttle signal. We know it should be around 5000 to start and near 0 when the pedal is on the floor.
Simply remove the 2 small wires plugged into the controller pins #2&3 and plug your test meter into these spade connectors. Set the meter to ohms. A 20,000 Ω range is best. But any reading such as 5.5 would represent 5500Ω
scottyb is offline   Reply With Quote