Made a little progress.
Could use some more input tho!
Test fit the shocks it's going to be tight.
I'm trying to think of a way to use the OEM shock mounts. Maybe by mounting a crossmember that would over hang the frame rails and attaching the shocks to it. I'd use .125in thick x 2in angle for the cross member. I dont know if the OEM mounts will be strong enough to support everything. Thoughts? They are aluminum and look to be about 1/4in thick.
My other idea is to make the red bracket. It would give me 3-4inches of adjustment up and down. I would bolt it to the frame with two 1/2in bolts going all the way through the frame rail.
Sent from my SM-G935V using Tapatalk