Quote:
Originally Posted by DFW Rusty
I just realized you have to the point of the triangle on the frame because there is a big honking motor in the way on the axle.....lol [emoji106]
|
Thanks for the info Rusty!
I've pretty much decided to just go for it and worry about perfecting later. I can always cut the mounts off and try again.
I have lowered the frame mount of the lower links it will put them at about 7 degrees.
I also increased the length of my uppers they are about 80% as long as the lowers.
Sent from my SM-G935V using Tapatalk