Thread: fireing truoble
View Single Post
Old 05-11-2009, 01:12 PM   #6
pat301
Not Yet Wild
E-Z-GO
 
Join Date: Apr 2009
Location: walkersville MD
Posts: 8
Default Re: fireing truoble

Hello, you can unplug your sparkplug wire at the coil use a volt meter or test light and see if you are getting power from the coil. If you have power there than plug the wire back in and test the plug wire. But as the micro switch is concerned for the one that is on the fire wall activated buy the gas peddle you should have one wire from the key switch to the common side of the micro switch and one wire from the other side going to the small post on the starter solenoid I hope this helps, I am shire some one might know better than me. Good luck
pat301 is offline   Reply With Quote