Buggies Gone Wild Golf Cart Forum - View Single Post - Just did my first DIY 14 Leaf pack. Not having Fun

NoleFan4Ever · 05-20-2019, 12:06 AM

The White wire should be jumpered on the the carts harness side connector to the Blue wire. Both of these wires are only jumpered at the harness, not the OBC. If this is not done, you will not have power to the controller to prevent Lock Out.

The solenoid Large post voltage is correct due to the resistor, BUT, since you said you are in RUN, that makes me think you have a Sepex cart and therefore there shouldn't be a resistor unless this is a stock Curtis Controller.

05-20-2019, 12:06 AM	#2
NoleFan4Ever MOD of all BS! Join Date: Sep 2011 Location: Florida Posts: 17,477	Re: Just did my first DIY 14 Leaf pack. Not having Fun - any help appreciated! The White wire should be jumpered on the the carts harness side connector to the Blue wire. Both of these wires are only jumpered at the harness, not the OBC. If this is not done, you will not have power to the controller to prevent Lock Out. The solenoid Large post voltage is correct due to the resistor, BUT, since you said you are in RUN, that makes me think you have a Sepex cart and therefore there shouldn't be a resistor unless this is a stock Curtis Controller.