Quote:
Originally Posted by JohnnieB
The High Throttle Input Underange error means the voltage at the controller's throttle input is outside the acceptable voltage range for the throttle type selected.
Check the voltage between the Black and White throttle input at the controller. (J4 Pins 3 & 4)
For an EZGO ITS throttle, you should have 10V with pedal up and 6V with pedal down.
|
I saw your posts about this elsewhere. I was hoping to avoid this since I didn't see how my ITS could go bad at this exact time. How do I check the voltage? I have a Fluke, but it is so tight to get down there I don't see how you all do it.
Assuming my ITS is bad, how hard is it to replace? Do I cut open my floormat or what?