Quote:
Originally Posted by Sergio
If You can post 2 more pictures: One from the soldered side of the PC board.
One showing the tabs coming out of the switch and into the PC board holes. I think a stock ITW 16 series switch will work, just need to verify the mounting. |
Shoot, sorry Sergio! I already fused it back together.
When I looked at the switch, it appears to be a standard switch with the extended terminals soldered to it. I don't think it would be difficult to unsweat the two existing pins and solder them on the new switch.
The screws that mount the switch are almost as big as the switch.