Quote:
Originally Posted by Sergio
The side of the diode with the band (cathode) always goes towards the positive activation wire when used as a flyback diode.
The issue I see there is that you have the small connectors under the main lug, that is a big problem.
On those type of Solenoids the main cable goes in direct contact with the large metal surface, no other cables or washers go under the cable lug.
Any other wires go on top of the main cable.
The same applies to battery posts.
|
I'll make sure to put the main lugs with nothing under them and remove the little lock washer sitting there.
For the diode, do I just reverse the diode and I'm good to go, or are the wires reversed as well?