View Single Post
Old 07-19-2019, 02:10 PM   #7
Mooncarter
Gone Insane
 
Mooncarter's Avatar
Club Car
 
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
Default Re: Just bought a Melex 666, question about voltage

You have a 48 volt series motor. You say it looks as if there were 8 batteries in it.

Seems to me someone has put the wrong (36 volt) controller in it.

A few observations: Just because it may have had 8 six volt batteries in it, you only need 6 eight volts (that is what I would do, cheaper and less weight.)

The cart probably has EZ GO components in it. I would check into it before purchasing but I'm pretty sure an EZ GO controller will work with that cart/motor. See what throttle it has/needs for the controller you purchase.

First things first. Look in the "stickies" here for "testing a series motor." Does not matter which brand motor,they test the same. Soak the motor studs down with PB Blaster or similar product. You must use 2 wrenches when removing the cables or you will break an insulator requiring removal and disassembly of motor. Make sure motor is good before buying anything.
Mooncarter is offline   Reply With Quote