Hi!
So I got a rebuild kit for my engine, took my engine out and replaced all the gaskets. I put the engine back in and tested. After a few hours of driving it around I noticed an oil leak. I figured I messed up something. Turns out the oil is leaking from the dipstick guide area and the overflow tube.
I don't know why it would leak from the overflow because it only has a little over 3/4 of oil in it.
Does anyone know how I can change the seal on the dipstick guide? Do I just pull the guide out or do I need to take the engine apart again.... :(
See image..
https://www.dropbox.com/s/uv7csz7hnz..._3624.JPG?dl=0
