Re: Extreme Team issues - post here
I got the bulkhead completed and the new BMS installed along with the new temp sensor and Bluetooth receiver.
I tried powering up the battery using the Bluetooth receiver button (like the instructions said), but nothing happened.
I hooked the battery up to the charger to power up the battery and the exact same thing happened like before:
1. I plug in the charger
2. The battery turns on
3. The in-dash volt meter shows 86V like it's charging
4. The charger fan does NOT turn on
5. The charger does not charge (battery stays at 70%)
6. As soon as I disconnected the charger the battery shut off
7. The SmartBMS app does not see, or connect, to the battery
|