Quote:
Originally Posted by BobBoyce
It may be the other connections on the Run Plug. There are + and - loop connections for the motor brake, as well as several other terminals for other functions. One of those is a motor brake sense line to the controller. See if you can borrow a Run Plug from somewhere and see if it fixes it. If so, copy the connections to your Run Plug. Beware though, there are controller ports wired to the Run Plug socket. If you short the wrong connections, you can damage ports on the controller. A norman Run Plug does not have pins for those connections.
|
All the wires were out of the run plug.
Sent from my SM-G950U using Tapatalk