Re: Scottyb's solid state conversion V2
Next out is the V-glide. Disconnect the gas pedal linkage by sliding the retention collar back and pulling the linkage to the passenger side away from the V-glide. Find and remove the 2 small nuts holding the V-glide to the frame.
And remove the octopus looking unit from the cart leaving a nearly blank canvas... I removed the Charge receptacle later to replace the charge wires ... it could come out now.
I replaced these wires because they are 30 yrs old and it seems silly at this point to leave any old wires in my cart. Also the charge receptacle terminals are a PIA and better dealt with on the work bench.
|