[consalvo21]

I just pulled of the small spring. The small spring was holding the throttle wide open and completely bypassed the throttle linkage. So I pulled it off and only have the governor spring on there. Someone said I needed this spring to hold the carb open a hair for initial startup and idle, is this true? If it is then I need to install that little bar because I think that that would hold the throttle from fully opening when everything is at rest. Moving that rod would allow me to adjust how much the carb is opening. Also when ever I push on the throttle then everything will move together allowing the carb to fully open. Does this make sense. Sitting at work so can't put this theory to test yet.