View Single Post
Old 03-26-2019, 03:49 PM   #4
yurtle
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

Do you know of anyone who can read a wiring diagram? It's really pretty simple. Microswitch MS4 and MS2 both share a jumper wire, usually red, which should be pack positive referencing pack negative. From there the backup signal or pack positive goes through MS4, which is supposed to be off unless the FNR is in reverse. Then the backup beeper should sound and pack positive goes to controller pin 4 for 1/2 speed. If MS4 is always closed - on - you can just leave it unplugged from controller pin 4 for now. There's nothing wrong with no 1/2 speed reverse, though no backup beeper is not the safest way to go. 1/2 speed reverse is to give you more precise control of the throttle.
yurtle is offline   Reply With Quote