Buggies Gone Wild Golf Cart Forum - View Single Post - Need help after converting ‘88 Club Car DS

NoleFan4Ever · 08-14-2017, 10:12 PM

When you converted did you maintain 36v or upgrade to 48v?

And you should not be getting pack voltage to the motor/controller side of the solenoid unless it is closed in. Is the solenoid stuck in the closed position? Take off the to activation wires and check it then. Also if it seems bad, take it off and test it. You should have continuity through the 2 small posts, no continuity through the 2 large posts. If that checks out, activate the solenoid and then verify you do now have continuity at the 2 large posts.

08-14-2017, 10:12 PM	#4
NoleFan4Ever MOD of all BS! Join Date: Sep 2011 Location: Florida Posts: 17,477	Re: Need help after converting ‘88 Club Car DS When you converted did you maintain 36v or upgrade to 48v? And you should not be getting pack voltage to the motor/controller side of the solenoid unless it is closed in. Is the solenoid stuck in the closed position? Take off the to activation wires and check it then. Also if it seems bad, take it off and test it. You should have continuity through the 2 small posts, no continuity through the 2 large posts. If that checks out, activate the solenoid and then verify you do now have continuity at the 2 large posts.