Re: 1991 par car coils going bad
My ignition switch works as it should. Nothing happens until I step on the gas. When I step on the gas it makes 1 or 2 sparks and then no spark. If I hold the gas down there is no spark. It sparks again when I let the gas pedal all the way back. It seems to only have spark when you first step on the gas pedal and let off the gas pedal at the end. I tried a new ignition module and then I have absolutely no spark at all. I tried a new coil and that makes no difference. I checked the voltage at the coil when it is turning over and I have about 9.5 volts. If I run a jumper wire from the battery to the coil it still won't start and I have no spark at all. Any thoughts?
|