Alltrax DCX500 recommeded setting for D and D 63-49 motor
All,
can anyone please guide me in the right directions for controller settings for the DCX500 controller with a D and D 63-49 motor? I am finishing my cart sometime today and I left the "recommended" settings from D and D on my desk at work. I do have a feeling that these settings may be a bit conservative anyways. Here is what I am currently running with my 36V setup with my PDS 2005 fleet speed shunt stock motor: I am upgrading to 48V
Field map 4
Max output current: 100%
Under voltage: 24.0 volts
over voltage: 55.0 volts
Throttle up rate: 3
Throttle down rate: 3
Brake current: 65%
Top speed: 100%
High pedal disable: checked
Turbo: checked
1/2 speed reverse: checked
throttle sensor: ezgo its
Throttle response: custom.... I believe they recommended linear
I would appreciate a good starting point... I am running 23inch tires and a 6 inch lifted cart with long travel suspension and a backwards rear seat. I ride on dirt roads that are mostly flat here in Orlando. thanks
|