Re: Controller for ezgo models
No, You need to determine which drive system you have. In 1996 they made DCS and series carts both had a lever by your knee to change direction but only the DCS had a run/tow toggle switch on the controller cover.
Further, the series cart has a shifter linkage the goes to a big rotary switch mounted on the floor under the passenger seat.
And the DCS cart has a silver saucer on the back side of the F&R lever.... under the seat where the series cart has the big linkage rod.
All Alltrax controllers need to programmed or preprogrammed to match your cart and your needs. The person who sells it to you can do it for you or you can do it with a series to usb cable and some free software from Alltrax.
|