Quote:
Originally Posted by trig123
I can't make out enough to say. Not even sure what rusty part I am looking at.
|
I think it's the input shaft for the rear end, where the secondary clutch should go.
With as rusty as that is, soak it for a couple days with liquid wrench. Then use left handed drill bit and an easy out.
Chances are, it probably wont work but I'll hope for the best for you. You'll probably have to just drill it out and tap it. Don't break that easy out off trying too hard. If it doesnt grab and start pulling it out then stop. You'll really be hating life if you have to drill through a drill bit or an easy out....