Quote:
Originally Posted by cskendrick26
I dont have anything like this with that connector, and what do you mean eliminate it, like disconnect it
|
If you don't have it...
Eliminating a connector means soldering or butt-splicing the four wire pairs. Some connectors serve a purpose. This one does not. Fabrication is all it was used for. The parts inside the throttle box already have spade connectors, and you'd replace them, not the whole box.
Just looking for "low hanging fruit", as a possible cause, as a bad connection/corrosion on any one of the four wires can cause a "no go" scenario.